Herringbone floor fitters in Dublin (oak, LVT & AC5 laminate).
Herringbone flooring is the single most requested floor layout in Dublin renovations and new builds.
From Victorian red-brick hallways in Ranelagh and Clontarf to open-plan new-build kitchens in Swords, Lucan and Sandyford, here is how herringbone is set out and fitted properly.
Free, no obligation. One local Dublin floor fitter prices your job, not five.
- €35–€65/m²Herringbone fitting (labour)
- €85–€145/m²Full supply, prep & fit
- ±2mm / 2mSR1 subfloor flatness required
- 10%–14%Cutting waste allowance
2026 Dublin Price & Specification Table
2026 Dublin herringbone flooring price breakdown
Compare click herringbone laminate, glue-down LVT parquet and prime engineered European oak blocks.
| Service / Flooring Type | Typical 2026 Dublin Price | Specification & What Is Included |
|---|---|---|
| Herringbone floor fitting — labour only (Click, T&G or Glue-Down) | €35 to €65 a m² | Laser centre-line set-out, 45° mitred cuts, door frame undercutting and threshold trims (add €12–€20/m² for perimeter border). |
| Herringbone engineered oak or LVT — full supply & fit | €85 to €145 a m² | Includes trade-grade herringbone blocks (AC5 laminate, LVT or 14mm engineered oak), flexible MS polymer adhesive or underlay, and fitting. |
| Laminate floor fitting — labour only (straight plank) | €18 to €30 a m² | Click-system AC4/AC5/AC6 straight-plank laminate laid over 3mm–5mm acoustic/UFH underlay with staggered joints. |
| Engineered wood floor fitting — floating or secret-nailed | €25 to €38 a m² | 14mm–20mm engineered oak planks floated over acoustic DPM underlay or secret-nailed to timber joists. |
| Engineered or solid oak — full glue-down (UFH compatible) | €35 to €50 a m² | Full-trowel Bona R848 / Wakol MS polymer flexible adhesive bond directly to primed concrete or anhydrite screed. |
| Glue-down LVT (Amtico / Karndean / Moduleo) — labour + smoothing screed | €38 to €62 a m² | Subfloor primer, 3mm fibre-reinforced latex self-levelling compound, feather-finish sanding and high-temperature pressure-sensitive adhesive. |
| Subfloor self-levelling compound (3mm–6mm latex screed) | €18 to €32 a m² | Ardex, F.Ball Stopgap or Mapei fibre-reinforced levelling screed to achieve SR1 flatness (+/- 3mm over 2m). |
| Liquid DPM surface moisture barrier (2-part epoxy) | €16 to €26 a m² | Protects timber and LVT floors against residual construction moisture up to 95%–98% RH in new-build concrete slabs. |
| Skirting board supply & mitred fitting (MDF or solid oak) | €12 to €24 a linear m | Removing old skirtings, scribing internal corners, mitring external corners, pinning, gluing and caulking top edge. |
Technical Breakdown
Why herringbone demands a specialist parquet fitter
Laser spine set-out through hallways & doorways
An inexperienced fitter starting against one side wall will end up with crooked triangles at the opposite wall. Our specialists strike a continuous laser centre-line down the hallway and into the kitchen-diner so the arrow points align dead-centre through every doorway.
Left & Right (A/B) tongue-and-groove vs Unilin Click blocks
Traditional engineered oak and solid parquet blocks come in handed Left (A) and Right (B) tongues glued with MS polymer adhesive, whereas modern 12mm AC5 herringbone laminate (such as Quick-Step Impressive or Whiteriver) uses precision-milled click joints that demand a rock-solid, zero-deflection base.
1-Plank & 2-Plank mitred perimeter borders
Framing a herringbone field with a single or double border plank parallel to the skirting boards (often accented with a 4mm solid brass or wenge inlay strip) elevates Victorian reception rooms and island kitchens.
Preventing creaks & open end-joints
90% of failed click-herringbone floors in Dublin trace back to skipping self-levelling compound over uneven concrete. Because short 600×120mm blocks have four times more joints per m², we laser-check and latex-screed dips before laying.
Calculate your Dublin floor fitting cost
Two taps: pick your approximate floor area and whether you need labour-only fitting or full supply-and-fit.
Your floor area × our 2026 Dublin price guide
€1,400 to €2,600
40 m² at €35–€65/m² for herringbone floor fitting (labour only). Includes door frame undercutting and threshold profiles; subfloor self-levelling or skirting removal is itemised separately if needed.
- Every quote includes moisture testing, door architrave undercutting and threshold trims.
- Subfloor latex self-levelling compound (€18–€32/m²) ensures zero bounce on herringbone and LVT.
How this estimate is worked out
Our calculator multiplies your area by 2026 Dublin floor layer rates: €18–€30/m² for straight-plank laminate labour, €28–€45/m² for engineered wood labour, €35–€65/m² for herringbone labour, €68–€115/m² for LVT supply & fit, and €85–€145/m² for herringbone supply & fit.
Get a free quote from a Dublin floor fitter
Four quick taps and your number. Your request goes to one local floor fitting specialist covering your Dublin postcode or commuter county, who rings you back with a fixed written price.
Herringbone Floor Fitters Dublin questions answered
Is it better to glue down or float herringbone flooring?
For engineered oak herringbone and 2.5mm LVT herringbone, full-surface glue-down onto a primed, latex-levelled screed is the gold standard — it feels solid underfoot, eliminates hollow tapping sounds, and works seamlessly with underfloor heating. Click AC5 laminate and SPC herringbone can be floated over a thin, high-density 1.5mm–2mm compressive underlay on an SR1-flat floor.
How much extra herringbone flooring should I order for waste?
Always order 12% to 15% extra over your net room area for diagonal 45-degree herringbone cuts (compared with 7% for straight planks). If your hallway has multiple angled doors or alcoves, allow 15%.
Can you run herringbone continuously from the hall into the kitchen without door bars?
Yes, with glue-down LVT and glued engineered oak herringbone, we can flow the pattern continuously from the entrance hall right through into an open-plan kitchen-living room without threshold strips.
How long does it take to fit 45 m² of herringbone flooring?
Allow 1 day for subfloor grinding, priming and pouring latex self-levelling compound, followed by 2 to 3 days for setting out the laser spine, laying the herringbone field and fitting skirting boards.
Related Dublin floor fitting guides
- <
Floor fitters across all Dublin postcodes (D1–D24) & commuter counties
Requests across North Dublin, South Dublin, West Dublin, Dublin City Centre (D1–D24) and commuter towns in Meath, Kildare, Wicklow and Louth go to one local floor fitting specialist covering your postcode. Pick your area below for local pricing and subfloor notes. View all 28 Dublin & commuter areas covered →
Get a free quote from a Dublin floor fitter
Four quick taps and your number. One local floor fitting specialist covering your Dublin postcode or commuter county rings you with a fixed written price. Nothing is booked until you accept it.