Floor fitters in Meath (Co. Meath Commuter Belt).
Looking for an experienced herringbone, LVT, engineered wood or laminate floor fitter in Meath (Co. Meath Commuter Belt) ?
We pass your enquiry to one local floor fitting specialist covering Meath and Co. Meath Commuter Belt — never a multi-lead directory or five competing callers.
Free, no obligation. One local Dublin floor fitter prices your job, not five.
- €18–€30 / m²Laminate fitting in Meath
- €35–€65 / m²Herringbone & LVT installation
- €25–€50 / m²Engineered & solid oak fitting
- SR1 FlatnessLatex screed & UFH moisture tested
2026 Meath Price Guide
Floor fitting & subfloor prices in Meath
Typical labour-only and supply-and-fit rates across Ashbourne, Ratoath, Dunshaughlin, Dunboyne, Clonee.
| Service / Flooring Type | 2026 Meath Rate | What Is Included |
|---|---|---|
| Herringbone floor fitting in Meath (labour only — oak, LVT or AC5 laminate) | €35 – €65 / m² | Laser spine set-out, 45° cuts, undercut door frames & thresholds |
| Herringbone engineered oak or LVT — full supply & fit (Meath) | €85 – €145 / m² | Trade herringbone packs, adhesive/underlay, SR1 prep & installation |
| Glue-down LVT (Amtico / Karndean / Moduleo) + 3mm latex screed (Meath) | €38 – €62 / m² | Primer, 3mm fibre-reinforced smoothing screed, sanding & high-temp bond |
| Engineered oak plank fitting in Meath (floating or glue-down UFH) | €25 – €50 / m² | 14mm–20mm European oak floated on acoustic DPM or MS-polymer bonded |
| Laminate floor fitting in Meath (straight plank AC4/AC5/AC6) | €18 – €30 / m² | Click laminate installation, door architrave undercutting & trims |
| Subfloor latex self-levelling screed or liquid DPM (Meath) | €16 – €32 / m² | Ardex / Stopgap fibre-reinforced leveller (+/- 3mm/2m) or 2-part epoxy DPM |
Local Subfloor & Fitting Know-How
Herringbone, LVT & wood floor fitting in Meath
Housing & subfloors in Meath (Co. Meath Commuter Belt)
Across Meath — featuring new-build commuter estates in Dunboyne, Ratoath, Ashbourne and Dunshaughlin where ground-floor UFH slabs come bare from the builder — subfloors vary between new-build liquid/sand-cement UFH screeds and older suspended timber floorboards. Our fitter checks flatness and slab moisture before laying a single plank.
Herringbone & LVT in Meath hallways and extensions
Seamless herringbone engineered oak and glue-down Amtico/Karndean LVT are our most popular installations across Ashbourne, Ratoath, Dunshaughlin, Dunboyne, Clonee, running continuously from the front hall into open-plan kitchen-diners with mitred borders.
Underfloor heating & apartment acoustics in Meath
For A-rated new builds in Meath, we use low-tog full-trowel MS polymer bonding or dryback LVT so heat pumps run at peak efficiency. For apartments, we install 19dB–21dB acoustic rubber underlay compliant with management company rules.
Suburbs & postcodes covered around Meath
Full coverage across Ashbourne, Ratoath, Dunshaughlin, Dunboyne, Clonee, Navan, Trim, Bettystown within the Meath County Council area. Nearby areas also covered: Floor fitters Blanchardstown · Floor fitters Castleknock · Floor fitters Swords · Floor fitters Louth.
Calculate your Dublin floor fitting cost
Two taps: pick your approximate floor area and whether you need labour-only fitting or full supply-and-fit.
Your floor area × our 2026 Dublin price guide
€1,400 to €2,600
40 m² at €35–€65/m² for herringbone floor fitting (labour only). Includes door frame undercutting and threshold profiles; subfloor self-levelling or skirting removal is itemised separately if needed.
- Every quote includes moisture testing, door architrave undercutting and threshold trims.
- Subfloor latex self-levelling compound (€18–€32/m²) ensures zero bounce on herringbone and LVT.
How this estimate is worked out
Our calculator multiplies your area by 2026 Dublin floor layer rates: €18–€30/m² for straight-plank laminate labour, €28–€45/m² for engineered wood labour, €35–€65/m² for herringbone labour, €68–€115/m² for LVT supply & fit, and €85–€145/m² for herringbone supply & fit.
Get a free quote from a Dublin floor fitter
Four quick taps and your number. Your request goes to one local floor fitting specialist covering your Dublin postcode or commuter county, who rings you back with a fixed written price.
Dublin floor fitting guides & 2026 price breakdowns
Straight technical specifications on herringbone set-out, glue-down LVT over latex screed, engineered oak over underfloor heating and 2026 Dublin labour rates.
More flooring guides & specifications: Laminate floor fitters Dublin · Parquet flooring installation & restoration · Solid oak floor fitting Dublin · Skirting board & architrave fitting · All floor fitting guides & calculator · Technical glossary · Frequently asked questions · All Dublin postcodes & areas covered · Editorial standards · About this site · Contact
Floor fitters in Meath — common questions
How much do floor fitters charge in Meath in 2026?
In 2026, floor fitters covering Meath (Co. Meath Commuter Belt) charge €18–€30/m² (labour only) for straight-plank laminate, €25–€50/m² for engineered oak planks, and €35–€65/m² for herringbone or glue-down LVT. Full supply-and-fit packages run €45–€145/m² depending on material.
Can I hire a floor fitter in Meath if I have already bought my own flooring?
Yes — our specialist covering Meath and Ashbourne, Ratoath, Dunshaughlin, Dunboyne, Clonee regularly fits homeowner-supplied flooring from Noyeks Newmans, TileStyle, Des Kelly, Woodie's, Canadia and Whiteriver, as well as offering full trade supply and fit.
Do you level uneven concrete or timber subfloors in Meath?
Yes. Before fitting herringbone, LVT or engineered wood in Meath, the installer can diamond-grind high spots, apply a 2-part liquid epoxy DPM moisture barrier (€16–€26/m²) and pour a 3mm–6mm fibre-reinforced latex self-levelling screed (€18–€32/m²).
Which neighbourhoods around Meath are covered?
One local floor fitting specialist covers all of Meath (Co. Meath Commuter Belt), including Ashbourne, Ratoath, Dunshaughlin, Dunboyne, Clonee, Navan, Trim, Bettystown, plus neighbouring postcodes.
Floor fitters across all Dublin postcodes (D1–D24) & commuter counties
Requests across North Dublin, South Dublin, West Dublin, Dublin City Centre (D1–D24) and commuter towns in Meath, Kildare, Wicklow and Louth go to one local floor fitting specialist covering your postcode. Pick your area below for local pricing and subfloor notes. View all 28 Dublin & commuter areas covered →
Get a free quote from a Dublin floor fitter
Four quick taps and your number. One local floor fitting specialist covering your Dublin postcode or commuter county rings you with a fixed written price. Nothing is booked until you accept it.