Engineered wood floor fitting in Dublin (14mm–20mm European oak).
Engineered wood combines a real 3mm to 6mm solid European oak wear layer with a cross-laminated birch plywood core that resists cupping and.
Whether you have wide-plank 190mm–240mm brushed-and-oiled oak or smoked chevron boards, here is how we install engineered timber to BS 8201 standards.
Free, no obligation. One local Dublin floor fitter prices your job, not five.
- €25–€38/m²Floating fit over underlay
- €35–€50/m²Full-trowel MS polymer glue-down
- 3mm–6mm OakSandable real hardwood top layer
- ≤ 27°C UFHSafe over heat-pump screed
2026 Dublin Price & Specification Table
Floating vs Full Glue-Down for engineered oak in Dublin
Choosing the right installation method for your subfloor, acoustics and heating system.
| Service / Flooring Type | Typical 2026 Dublin Price | Specification & What Is Included |
|---|---|---|
| Herringbone floor fitting — labour only (Click, T&G or Glue-Down) | €35 to €65 a m² | Laser centre-line set-out, 45° mitred cuts, door frame undercutting and threshold trims (add €12–€20/m² for perimeter border). |
| Herringbone engineered oak or LVT — full supply & fit | €85 to €145 a m² | Includes trade-grade herringbone blocks (AC5 laminate, LVT or 14mm engineered oak), flexible MS polymer adhesive or underlay, and fitting. |
| Laminate floor fitting — labour only (straight plank) | €18 to €30 a m² | Click-system AC4/AC5/AC6 straight-plank laminate laid over 3mm–5mm acoustic/UFH underlay with staggered joints. |
| Engineered wood floor fitting — floating or secret-nailed | €25 to €38 a m² | 14mm–20mm engineered oak planks floated over acoustic DPM underlay or secret-nailed to timber joists. |
| Engineered or solid oak — full glue-down (UFH compatible) | €35 to €50 a m² | Full-trowel Bona R848 / Wakol MS polymer flexible adhesive bond directly to primed concrete or anhydrite screed. |
| Glue-down LVT (Amtico / Karndean / Moduleo) — labour + smoothing screed | €38 to €62 a m² | Subfloor primer, 3mm fibre-reinforced latex self-levelling compound, feather-finish sanding and high-temperature pressure-sensitive adhesive. |
| Subfloor self-levelling compound (3mm–6mm latex screed) | €18 to €32 a m² | Ardex, F.Ball Stopgap or Mapei fibre-reinforced levelling screed to achieve SR1 flatness (+/- 3mm over 2m). |
| Liquid DPM surface moisture barrier (2-part epoxy) | €16 to €26 a m² | Protects timber and LVT floors against residual construction moisture up to 95%–98% RH in new-build concrete slabs. |
| Skirting board supply & mitred fitting (MDF or solid oak) | €12 to €24 a linear m | Removing old skirtings, scribing internal corners, mitring external corners, pinning, gluing and caulking top edge. |
Technical Breakdown
Technical standards for engineered hardwood installation
Full-Trowel Glue-Down (Bona R848 / Wakol MS 260 — €35–€50/m²)
Using a V-notched trowel to bond 14mm–20mm engineered planks directly to the concrete or liquid screed eliminates hollow footfall sound, improves underfloor heating efficiency by 20%+, and allows wider threshold-free runs across open-plan ground floors.
Floating over Acoustic / DPM Underlay (€25–€38/m²)
T&G or 5G-click engineered planks are edge-glued with PVA D3 adhesive or clicked together over a 3mm–5mm foil-backed rubber/timber-fibre acoustic underlay. Ideal for Dublin apartments (where management companies require 19dB–21dB impact sound reduction) and upstairs bedrooms.
Secret-Nailing onto Timber Joists or Battens (€30–€42/m²)
For 18mm–21mm structural engineered oak planks in period Dublin homes (Rathmines, Clontarf, Monkstown), planks can be secret-cleated at a 45° angle through the tongue directly into timber joists or plywood subfloors.
Hygrometer & Carbide Moisture Testing
Never lay engineered oak onto a damp new-build slab. Our fitters test every screed: if residual moisture exceeds 65%–75% RH (2.0% CM on cement, 0.5% CM on anhydrite), a 2-part liquid epoxy DPM barrier is rolled on first.
Calculate your Dublin floor fitting cost
Two taps: pick your approximate floor area and whether you need labour-only fitting or full supply-and-fit.
Your floor area × our 2026 Dublin price guide
€1,400 to €2,600
40 m² at €35–€65/m² for herringbone floor fitting (labour only). Includes door frame undercutting and threshold profiles; subfloor self-levelling or skirting removal is itemised separately if needed.
- Every quote includes moisture testing, door architrave undercutting and threshold trims.
- Subfloor latex self-levelling compound (€18–€32/m²) ensures zero bounce on herringbone and LVT.
How this estimate is worked out
Our calculator multiplies your area by 2026 Dublin floor layer rates: €18–€30/m² for straight-plank laminate labour, €28–€45/m² for engineered wood labour, €35–€65/m² for herringbone labour, €68–€115/m² for LVT supply & fit, and €85–€145/m² for herringbone supply & fit.
Get a free quote from a Dublin floor fitter
Four quick taps and your number. Your request goes to one local floor fitting specialist covering your Dublin postcode or commuter county, who rings you back with a fixed written price.
Engineered Wood Floor Fitting Dublin questions answered
What thickness of engineered wood is best over underfloor heating?
A 14mm or 15mm engineered oak plank (with a 3mm or 4mm solid oak top layer on a multi-ply birch core) offers the ideal balance of structural stability and low thermal resistance (~0.11 m²K/W when glued down). Up to 18mm–20mm can be used if fully bonded, provided the UFH surface temperature never exceeds 27°C.
Should I choose lacquered or UV-oiled engineered oak?
Matt UV-lacquered oak (such as Bona Traffic HD finish) is virtually maintenance-free and resists kitchen spills. Brushed and UV-oiled oak has a warm, natural matte texture and allows local spot-repairs with maintenance oil without sanding the whole room.
How long should engineered wood acclimatise in a Dublin home?
Deliver the unopened packs 3 to 5 days before fitting into the heated, plastered and dried rooms (at 18°C–21°C and 45%–60% room humidity). Never store engineered wood in a damp garage or while wet plastering is still drying.
Can engineered wood be sanded and refinished in the future?
Yes — a 3mm wear layer can be professionally sanded and re-lacquered 1 to 2 times over its 30-year life; a 4mm to 6mm wear layer can be sanded 3 to 5 times, just like a solid oak floor.
Related Dublin floor fitting guides
- <
Floor fitters across all Dublin postcodes (D1–D24) & commuter counties
Requests across North Dublin, South Dublin, West Dublin, Dublin City Centre (D1–D24) and commuter towns in Meath, Kildare, Wicklow and Louth go to one local floor fitting specialist covering your postcode. Pick your area below for local pricing and subfloor notes. View all 28 Dublin & commuter areas covered →
Get a free quote from a Dublin floor fitter
Four quick taps and your number. One local floor fitting specialist covering your Dublin postcode or commuter county rings you with a fixed written price. Nothing is booked until you accept it.